Piotr Skarbiński

ALRO, one of the largest vertically integrated aluminum producers in Europe measured by production capacity, has purchased an aluminum aging furnace with electric heating. The project objective is to increase the output of high and very high added products.

The SECO/WARWICK furnace has been designed for aging type 2xxx, 6xxx and 7xxx aluminum plates with a length of up to 13,000 mm and a width of up to 2,200 mm. They can be arranged in one or two rows. The load will be placed horizontally on loading trays with the maximum capacity of 60 tons net. The furnace will be heated electrically, which will significantly reduce CO₂ gas emissions.

This electric furnace will replace three furnaces powered by natural gas with the aim of streamlining the heat treatment operations within the ALRO Processed Aluminum Division. The furnace represents an important step towards achieving the company's goal of becoming a greener producer.

Piotr Skarbiński, vice president of the Aluminum Process and CAB Business Segments at SECO/WARWICK, explains, “The challenge of reducing emissions is becoming an increasingly important purchasing impulse for customers. This applies in particular to European producers, because in this region of the world ecological regulations are currently the most restrictive. The aluminum aging furnace, powered by electric heaters, eliminates the emissions problem, hence the growing interest of aluminum producers in such solutions.”

Gheorghe Dobra, CEO at ALRO, commented, “The new equipment, provided by SECO/WARWICK, will support our program to maximize the value of the products we are manufacturing and will allow us to better serve our customer’s requirements. At the same time, the new technology will support our commitment to reduce our environmental footprint.”

"We have already completed several orders for new equipment for this customer," said Tomasz Kaczmarczyk, sales manager of the Aluminum Process and CAB Furnaces Teams at SECO/WARWICK, "including a gas aging furnace and ingot preheating furnace. We have also modernized furnaces for annealing aluminum sheet coils."

Aging furnaces are designed to operate in the temperature range from 176ºF to 482ºF in accordance with the AMS2750G standard. The temperature uniformity guarantee throughout the entire load at the level of +/- 3ºC was achieved with the use of optimal heat flow inside the furnace using high-performance atmosphere mixers and a system of guides directing the air stream.

This press release is available in its original form here.