ASM International

15 Quick Heat Treat News Items to Keep You Current

/ FEATURED NEWS, HEAT TREAT NEWS INDUSTRIES

Heat Treat Today offers News Chatter, a feature highlighting representative moves, transactions, and kudos from around the industry.

Personnel and Company Chatter

  • Roger Smith has recently been appointed Technical Manager at Plibrico Company, LLC.  Smith will be responsible for development of innovative refractory formulas, oversee product quality, and assist in identifying the best materials for refractory construction projects.
  • William “Bill” Cowell has been promoted to the position of Vice President of Operations at Advanced Heat Treat Corp. (AHT). Cowell, who has been at AHT since 1999, will oversee operations for all AHT  facilities.
  • Wirco has announced the promotion of Aaron Fisher to Vice President of our Fabrication Division. Aaron has been with Wirco for 19 years. In addition, Wirco welcomes Marco Möser as the Vice President of our Foundry Division.
  • Thomas G. Gasbarre has stepped down as Chief Executive Officer of Gasbarre Products, Inc, a position he has held since his father George Gasbarre, the founder of the company, retired in 1990. Gasbarre also announced that Tom’s son, Alex Gasbarre, has been appointed Chief Executive Officer and is now leading the development and execution of the company’s short- and long-term strategies. Heath Jenkins has been promoted and will succeed Alex as President, Press & Automation, and Manufacturing Technologies.
  • John C Plant has been appointed to serve as Chairman and Chief Executive Officer at Arconic Inc. The Board has also appointed Elmer L. Doty, a current Director, to serve as Chief Operating Officer, and Arthur D. Collins, Jr., a current Director, to serve as Lead Director. These appointments are effective immediately.
  • Xerox, based in Norwalk, Connecticut, has acquired metal additive manufacturing company Vader Systems, which will enable it to offer its customers access to low-cost metal additive manufacturing with a greater variety of metals. Based in Buffalo, New York, Vader Systems is a developer of liquid metal additive manufacturing technology.

Equipment Chatter

  • Several convection ovens were supplied to a manufacturer of small medical parts in the southern U.S. by Lucifer Furnaces. Model 42-B18 has a working chamber size of 9”H x 9”W x 18”L and heats to 1200°F.
  • A floor-standing furnace has been shipped by L&L Special Furnace Co., Inc. to a worldwide leader of high tech ceramics and associated components located in the Northeastern United States. The furnace will be used for glass components along with fiber optics and research and development. It will also be used to fill in on various thermal projects and development.
  • A Treet-All™ Box Furnace has been shipped to a Japan-based global battery manufacturing company by Lindberg/MPH.  The maximum temperature rating of this light industrial box furnace is 2050°F and has work chamber dimensions of 18” wide x 36” deep x 18” high. The Treet-All™ Light Industrial Box Furnace is suited for multiple applications, including annealing, ashing, austempering, brazing, preheating, solution treating, stress relieving, and normalizing.
  • A supplier of the aerospace industry received shipment of a Electrically Heated Horizontal Quench Solution Treat System from Wisconsin Oven Corporation. The Horizontal Quench Solution Treat System has a maximum oven operating temperature of 1,200° F and work zone dimensions of 5’4″ wide x 5’6″ long x 5’4″ high (above the rollers).
  • Chromalox, a thermal technology provider, recently contracted with Sierra Monitor Corporation  to enable cloud system connectivity on their Heat Trace solution.
  • A cabinet oven is being used to finish batch loads of metal parts at a customer’s facility. The No. 828 is a 500°F (260°C) cabinet oven from Grieve Corporation.
  • A recycling and melting group has ordered for installation a Twin-Chamber Melting Furnace TCF® from Tenova LOI Thermprocess. Italy-based Fonderie Pandolfo specializes in processing of aluminum, mainly for extrusions. The casted billets are mainly extruded in the extrusion shops of the main European extruders.

Kudos Chatter

  • Buehler, an ITW Company, and ASM International are celebrating 75 of continuous partnership in 2019. Buehler has continuously supported of the ASM World Training Center in Novelty, Ohio, through its innovations for metallography and hardness testing, solutions for the newest materials and participation in ASM International activities.
  • Pennsylvania-based Onex Inc recently completed a forge furnace refractory reline in one week.

Heat Treat Today is pleased to join in the announcements of growth and achievement throughout the industry by highlighting them here on our News Chatter page. Please send any information you feel may be of interest to manufacturers with in-house heat treat departments especially in the aerospace, automotive, medical, and energy sectors to the editor at editor@heattreattoday.com.

15 Quick Heat Treat News Items to Keep You Current Read More »

A Baker’s Dozen Quick Heat Treat News Items to Keep You Current

/ FEATURED NEWS, HEAT TREAT NEWS INDUSTRIES

A Baker’s Dozen Quick Heat Treat News Items to Keep You Current

Heat Treat Today offers News Chatter, a feature highlighting representative moves, transactions, and kudos from around the industry.

Personnel and Company Chatter

  • Peters’ Heat Treating, Inc. recently announces that Andrew S. Wilkosz has been named president of the company. Wilkosz, who has been with Peters’ Heat Treating, Inc. for nearly four years, was previously acting as the Vice President of Operations, overseeing the day to day operations of the company across all three facilities. Wilkosz is also a principal in Laser Hard, Inc., specializing in robotic laser heat treating and cladding. He is also a Heat Treat Today 2018 40 Under 40 recipient.
  • Geoffrey Somary has been appointed to CEO of Ipsen Group worldwide, taking over the position after former CEO Thorsten Kruger moved to the Advisory Board of the company.
  • Jake Verdoux has recently been promoted to the position of Manufacturing Manager for Plymouth, Michigan-based, Gasbarre Industrial Furnace Systems (IFS) (formerly known as J.L. Becker).
  • A ribbon-cutting ceremony was held to mark the completion and opening of a 15,000-square foot building expansion at the corporate headquarters of Advanced Heat Treat Corp. (AHT), located in Waterloo, Iowa.
  • Braidy Industries has alerted potential investors that the aluminum mill it plans to build in northeast Kentucky will open in 2021, not in 2020 as previously projected, a change due to a “minor adjustment to the construction schedule.”
  • Multiple industries have recently purchased and installed equipment in SECO/WARWICK’s Vector® vacuum furnace line, including an international electric motor producer, an emissions control device manufacturer, a forging company, a defense contractor, an automotive manufacturer, and an aircraft components manufacturer.
  • Kandil Steel, headquartered in Cairo, Egypt, recently commissioned bell annealer technology from EBNER. Kandil, which is celebrating its 150 anniversary, is expanding the EBNER HICON/H2® bell annealer located at Galva Metal by four work bases to a total of fourteen. The facility is scheduled to start production in 2020.
  • A 2000°F (1093°C), inert atmosphere, heavy-duty furnace, No. 1039, was recently purchased for heat treating turbine components at a customer’s facility. The workspace dimensions of the Grieve Corporation furnace measure 36” W x 60” D x 36” H. 73.
  • A medical device company recently acquired the assets of Options Medical LLC, a Florida-based medical device distributor. Orthofix Medical Inc., which manufactures musculoskeletal products and therapies, is purchasing the distributor of bone growth therapies devices.
  • A U.S.-based orthopedic and spinal medical device manufacturer and developer recently agreed to sell major assets related to its artificial joint, trauma and spinal product businesses to Kyocera International Inc., based in San Diego, Calif.  The assets of Renovis Surgical Technologies Inc. will be transferred into a new California-based company, wholly owned by Kyocera International Inc., to be named Kyocera Medical Technologies Inc.

  • Buehler, an ITW Company, and ASM International are celebrating 75 of continuous partnership in 2019. The pinnacle of this relationship is Buehler’s continuous support of the ASM World Training Center in Novelty, Ohio, through its innovations for metallography and hardness testing, solutions for the newest materials and participation in ASM International activities.
  • APMI International has named Joseph Tunick Strauss and John L. Johnson. as the organization’s 2019 Fellows. APMI International’s most prestigious award recognizes APMI members for their significant contributions to the goals, purpose, and mission of the organization as well as for a high level of expertise in the technology, practice, or business of the industry.
  • Chemical Coaters Association International (CCAI) recently announced its first Women in Finishing FORUM which will be held at the Embassy Suites South Bend at Notre Dame from May 9-11, 2019. CCAI began its Women in Finishing initiative with a networking reception at FABTECH 2017 in Chicago. The response exceeded expectations, leading to the official establishment of Women in Finishing (WiF) under CCAI. 2019 will feature the expansion of WiF programming, including the Women in Finishing FORUM.

Heat Treat Today is pleased to join in the announcements of growth and achievement throughout the industry by highlighting them here on our News Chatter page. Please send any information you feel may be of interest to manufacturers with in-house heat treat departments especially in the aerospace, automotive, medical, and energy sectors to the editor at editor@heattreattoday.com.

A Baker’s Dozen Quick Heat Treat News Items to Keep You Current Read More »

Heat Treat Today Contributor to Present Webinar on Induction Heating Challenges

/ MANUFACTURING HEAT TREAT, MANUFACTURING HEAT TREAT NEWS

Heat Treat Today Technical Tuesday contributor, Dr. Valery Rudnev, FASM, IFHTSE Fellow, “Professor Induction”, and Director of Science and Technology at Inductoheat, Inc, is the featured speaker of an ASM International Materials Solutions webinar titled “Simple Solutions for Common Induction Heating Challenges: Lessons Learned”.

Dr. Rudnev will present this webinar on Thursday, January 24, 2019, 2 pm, and address:

  • Induction hardening of powertrain transmission and engine components
  • Failure analysis
  • How to avoid cracking in induction hardening
  • Subtleties of heating parts with holes, fillets, and other geometrical irregularities
  • Re-hardening (re-austenitization) of previously hardened parts
  • Novel inverters that allow instant and independent adjustment of both frequency and power
  • Selected challenges when applying induction tempering
  • Reducing process sensitivity and improving robustness and flexibility of induction systems.

Note: Attendees will earn a professional development hour for attending the webinar.

This webinar is sponsored by Inductoheat, Inc. For more information and to register, click here.

Heat Treat Today Contributor to Present Webinar on Induction Heating Challenges Read More »

15 Quick Heat Treat News Items to Keep You Current

/ FEATURED NEWS, HEAT TREAT NEWS INDUSTRIES

15 Quick Heat Treat News Items to Keep You Current

Heat Treat Today offers News Chatter, a feature highlighting representative moves, transactions, and kudos from around the industry.

Personnel and Company Chatter

  • The purchase of a producer of fixtures and parts in refractory alloys for heat treatment, steel, incineration, power generation, automotive, and aerospace industries was recently announced. The Safe-Cronite business unit of the Safe Group was purchased by its CEO Pierre Wittmann and a group of managers in partnership with investment funds driven by CICLAD.
  • The central laboratory of H.C. Starck, known until recently as H.C. Starck Analytical Services, announced it became an independent company with the name ChemiLytics GmbH & Co. KG. The new company will remain part of the H.C. Starck Group. The company is presented on its new webpage www.chemilytics.com to provide interested customers with an overview of the company, its core competencies, and service range.
  • Paulo, a supplier of heat-treating services for a wide range of industries headquartered in St. Louis, Missouri, officially inaugurated its first plant outside the U.S., located at the GP Escobedo industrial park in the municipality of Escobedo, Nuevo Leon. The facility started operations earlier this year providing proprietary heat-treatment processes for the automotive industry in a 50,000 square-feet footprint which is expected to expand up to 110,000 sq.-ft as new equipment keeps coming into the plant in order to serve manufacturers of aerospace components and agriculture equipment, among others.
  • A leading producer of semi-fabricated specialty aluminum products Kaiser Aluminum Corporation recently announced that it has acquired Imperial Machine & Tool Co., a leader in multi-material additive manufacturing and machining technologies for aerospace and defense, automotive, high-tech, and general industrial applications.

Equipment Chatter

  • Ipsen USA recently announced several furnace shipments, including several TITAN® vacuum furnaces from the platform product line, several custom horizontal and vertical vacuum furnaces and multiple atmosphere box furnaces all designed to meet customers’ specifications. Many of these shipments also included PdMetrics® software for predictive maintenance.
  • Gasbarre recently designed, manufactured, and commissioned a large capacity gas-fired temper furnace for a major specialty alloy manufacturing company located in the Northeastern portion of the United States. The furnace is designed to temper workloads that are 32 feet wide by 6 feet long by 4 feet high and weigh up to 40,000 lbs. The furnace utilizes the latest design and control technologies to achieve excellent temperature uniformity (±10°F) across a wide temperature range (800°F to 1400°F)
  • A new Hot Isostatic Press will soon be in operation at Lake City Heat Treating, expanding their Hot Isostatic Press capabilities for the aerospace and medical industries. With a much larger capacity of 2,000 pounds per load, Lake City will be able to expand load sizes and meet customer turnaround requirements. The new press will be housed in their new 6,000 square foot addition.
  • Solar Atmospheres of Western PA recently commissioned a new 20-foot car bottom furnace that has a total load capacity of up to 30,000 pounds. The Class 2 furnace, built by John Becker’s Heat Treat Equipment Inc., located in Canton, Michigan, was installed and fully tested for the first time in Hermitage, PA. This new piece of equipment will serve to compliment Solar’s lower temperature work – especially where surface oxidation is of little concern. It will also be used to economically process many “downstream” processes, including multiple tempering operations, which typically follow vacuum austenitizing treatments.
  • Quintus Technologies supplied a hot-isostatic press to a Chinese manufacturer to complement the additive manufacturing capabilities at Xi’an Bright Laser Technologies Co., Ltd. BLT produces 3DP parts in titanium and aluminum alloys, superalloys, and stainless, die, and high-strength steels, for a range of industrial applications, including automotive engine and structural parts, aircraft engine and structural components, mold/die, energy, electronics, and other customer segments.

Kudos Chatter

  • Materion Corporation recently announced that the Society of Automotive Engineers – Aerospace Material Specification Nonferrous Alloys Committee (SAE-AMS) has approved AMS4369 specification for SupremEX® 225XF metal matrix composite (MMC) and AMS4379 for SupremEX 225XE MMC. This represents the second AMS specification for SupremEX 225XE and applies to the extruded form of the material. With the two recently added specifications, the company now has a total of four AMS specifications for its SupremEX line of products, allowing engineers to reference a national standard for material properties.
  • Worcester Polytechnic Institute recently presented its 2018 Innovator of the Year Award to metallurgical pioneer Diran Apelian. The first WPI faculty member to receive the honor, Apelian is the founding director of WPI’s Metal Processing Institute, an internationally recognized researcher and educator, and a fellow of the National Academy of Inventors.
  • ASM International recently recognized several members for achievement at its ASM Awards Banquet, held in Columbus, OH on October 16, 2018. In addition, ASM International Trustee-Elects have been selected to serve on the 2018-2019 ASM Board of Trustees. ASM International’s trustees are charged with acting in the best interests of the society’s membership and help to lead the governance of the society. The ASM officers and trustees were officially installed in office at ASM’s Annual Meeting on October 15, 2018, also in Columbus, OH. Details can be found at ASM International’s website: https://www.asminternational.org/membership/awards/photos
  • Kanfit Ltd., a leading manufacturer of assemblies and subassemblies for the aerospace industry, announced today that it has recently achieved Nadcap re-certification for chemical processing and heat treatment following thorough audits of the Performance Review Institute. Kanfit was awarded recertification of Chemical Processing and is qualified for full Nadcap merit status of 24 months. This means that the frequency between audits has been increased from 18 months to two years. Kanfit has been Nadcap accredited for chemical processing since 2013 and has been accredited by Nadcap for heat treating since 2008.
  • GE Aviation recently produced 30,000th 3D printed fuel nozzle at its Auburn, Alabama, plant.
  • Surface Combustion Inc., Maumee, Ohio, has recently updated its website, which provides details about its standard atmosphere and vacuum furnace designs. Not only is the website mobile friendly, but also thermal processing solutions on the product, industry, and process pages are easier to navigate.

Heat Treat Today is pleased to join in the announcements of growth and achievement throughout the industry by highlighting them here on our News Chatter page. Please send any information you feel may be of interest to manufacturers with in-house heat treat departments especially in the aerospace, automotive, medical, and energy sectors to the editor at editor@heattreattoday.com.

15 Quick Heat Treat News Items to Keep You Current Read More »

Metallography of Steels Updated, Translated into English

/ HEAT TREAT NEWS INDUSTRIES

 

Professor Hubertus Colpaert

A valuable reference publication that combines a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials has recently been updated and re-released in a fourth edition English translation.

Metallography of Steels: Interpretation of Structure and the Effects of Processing was first published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil. The book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons and has now been updated and translated by Professor André Luiz V. da Costa e Silva, preserving the concept of the original edition. Important developments in the areas of metallographic characterization and steel and iron products were added. Progress in the understanding of the transformations that made the extraordinary developments of these alloys possible was also added to the new edition.

Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur.

Most metallographs are of actual industrial materials, and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a useful resource even for experienced steel practitioners.

Metallography of Steels: Interpretation of Structure and the Effects of Processing is available at http://www.asminternational.org/metallographyofsteels or by calling the ASM International Service Center at 440-338-5151.)

Metallography of Steels Updated, Translated into English Read More »

“Titanium Man” Recognized for Developing Titanium Heat Treating Protocol

/ AEROSPACE HEAT TREAT, AEROSPACE HEAT TREAT NEWS, FEATURED NEWS, TITANIUM PROCESSING NEWS

 

 

Source: Santa Monica Daily Press

 

If there’s one thing that can be determined by reading through the reasons given for nominations to Heat Treat Today‘s 40 Under 40 feature, it’s this: there are in the industry many young metallurgical and heat treating professionals with drive, intelligence, work ethics, and skill that will land them a multitude of awards, promotions, and public acknowledgements.

But as to whether any of them will match the achievements of “titanium savant” Russell Gordon Sherman remains to be seen.

“Sherman’s claim to fame is his research and development concerning alloys and heat-treating protocols for the titanium industry, expanding upon the usability of the metal during the formative years of the titanium industry.”

Dr. Frauke Hogue, a Fellow of ASM International

Recently, Dr. Sherman, 92, who is a member of ASM International, was announced as the recipient of the 2018 Lifetime Achievement Award from the International Titanium Association for “his work in developing titanium alloys, pioneering the high-volume production of titanium aerospace fasteners, and designing heat treating protocols for the titanium industry.”

The Santa Monica Daily Press noted that Sherman made possible the high-volume production of titanium aerospace fasteners during the years when the U.S. and the Soviet Union were vying for aerospace supremacy. Sherman will be presented with the award at the Titanium USA 2018 Conference and Exhibition, October 7-10, 2018, in Las Vegas.

“The entire titanium industry has benefited from his research into developing a higher-strength titanium (the workhorse Ti-6Al-4V alloy) through the heat treatment of solution treating and aging,” wrote Dr. Frauke Hogue, a Fellow of ASM International.

Sherman’s research, presented first in a paper at ASM’s convention in Philadelphia in October 1955, titled, “The Heat Treatability of Ti-6Al-4V”, went on to impact multiple industries but particularly the industrial fastener industry as it intersected with aerospace.

Still providing consulting services in the titanium industry, Sherman, though retired, is not resting on his laurels.

“. . . . If you’re lucky, you might spot the Titanium Man out in Santa Monica, relaxing after a much-accomplished life.”

 

Read more:

“Russell Gordon Sherman, The Titanium Man”, Santa Monica Daily Press

“ASM member Russell Sherman Receives Award from International Titanium Association”, ASM International

 

 

“Titanium Man” Recognized for Developing Titanium Heat Treating Protocol Read More »

Heat Treat Today’s Induction Expert Dr. Valery Rudnev Recognized at TPiM 2018

/ MANUFACTURING HEAT TREAT, MANUFACTURING HEAT TREAT NEWS

Dr. Valery Rudnev, who writes Heat Treat Today‘s column, “Dr Valery Rudnev On . . . “, was recognized during the opening ceremony of the American Society for Materials (ASM International) Thermal Processing in Motion 2018 (TPiM 2018) conference held this month in Spartanburg, South Carolina, and received two prestigious awards for his contributions in the field of induction heating and heat-treating.

Dr. Rudnev, Director of Science and Technology at Inductoheat Inc., an Inductotherm Group Company, was elected as a Fellow to the International Federation for Heat Treatment and Surface Engineering (IFHTSE) “[f]or his preeminence in induction heat treating and modeling of the induction heat treating process” (IFTSE, 2018). As a Fellow of ASM International with more than 30 years of experience, he is considered by many to be one of the leading global figures in the induction heating and is known among induction heating professionals as “Professor Induction.” His credits include a great deal of “know-how”, more than 50 patents and inventions (U.S. and International), and more than 250 engineering/scientific publications.

Dr. Richard D. Sisson Jr., George F. Fuller Professor, Director of Manufacturing and Materials Engineering and the Director of the Center for Heat Treating Excellence at Worcester Polytechnic Institute, and Professor Rafael Colás, Professor and Metallurgist Engineer, Universidad Autónoma de Nuevo León, were awarded fellowships with IFHTSE.

Dr. Rudnev was also presented with the ASM International “Best-Paper in Heat Treating” award for co-authoring an article entitled “Revolution – Not Evolution – Necessary to Advance Induction Heat Treating.” The article was published in the September 2017 issue of Advanced Materials & Processes Magazine (HTPro quarterly newsletter) and co-authored with Gary Doyon, Collin Russell, and John Maher. The ASM International Heat Treating Society, Research and Development Committee, established this award to recognize the best papers in the heat treat industry each year.

IFHTSE is a nonprofit group of scientific/technological societies and associations, groups and companies and individuals whose primary interest is heat treatment and surface engineering.

We at Heat Treat Today congratulate Dr. Valery Rudnev on these accomplishments!

Heat Treat Today’s Induction Expert Dr. Valery Rudnev Recognized at TPiM 2018 Read More »

15 Quick Heat Treat News Items to Keep You Current

/ FEATURED NEWS, HEAT TREAT NEWS INDUSTRIES

15 Quick Heat Treat News Items to Keep You Current

Heat Treat Today offers News Chatter, a feature highlighting representative moves, transactions, and kudos from around the industry.

Personnel and Company Chatter

  • D. Scott MacKenzie, PhD., Senior Research Scientist–Metallurgy at Houghton International, was elected by the International Federation of Heat Treating and Surface Engineering (IFHTSE) to serve as president for a two-year term. Dr. MacKenzie has been the ASM representative to IFHTSE Executive Committee since 2015 and was awarded ASM Fellow in 2007; he has also published over 150 publications and books, mainly in the field of heat treating and quenching.
  • A new generation of leadership takes over at Michigan-based, flat-rolled steel distributor Grand Steel Products Inc. Jim Barnett, retiring as president and COO, announced that his son, Michael Barnett, has assumed those roles, having started with the company in 2006 and overseeing growth through the purchase of an operations building in 2008, purchase and installation of a slitting line in 2011, and office renovations and additions in 2014. Michael also assisted in the formation of Barnett Industrial Properties and Grand Steel Transport, where he is a Partner. This year, Jim and Michael also added a new company within the same property of Grand Steel Products’ by adding Steel Testing Laboratory (STL).
  • ASM International recently announced that member John Storm, president and CEO of Contour Hardening Inc. (CHI), passed away on May 13, 2018, at the age of 63. "John helped pioneer work with dual frequency induction hardening to strengthen gears and shafts by creating a uniform hardened case pattern. In 1986 . . . he ventured out to co-found CHI with the goal of supplying the industry with innovative induction hardening systems. . . He holds over 200 U.S. and International patents on a variety of processes and applications."
  • The Aluminum Extruders Council (AEC) announced that R. Scott Kelley, president and CEO of Service Center Metals in Prince George, Virginia, was elected to serve as chairman of the Aluminum Extruders Council.  Mr. Kelley has been a member of the AEC Board of Directors since 2013 when he served as an Independent Extruder Director until he was elected to the Executive Committee in 2016 as Vice Chairman of the Council.
  • Gervais Jacques, Managing Director--Atlantic at Rio Tinto Aluminum, has been appointed Chair of the International Aluminium Institute (IAI). As IAI Chair he succeeds Hilde Merete Aasheim, executive vice president of Hydro's Aluminum Metal business, at the end of her two-year tenure.
  • Mary Pernacciaro has been named Director of Quality Management Systems at Illinois-baesd ADVANCED Heat Treating Inc, overseeing maintenance and improvements within the company’s quality systems.
  • Gerdau S.A. recently announced that Chia Yuan Wang, currently the Supply Chain Vice-President in North America, was appointed as the new president for its North American Long Steel Operation, succeeding the CEO of Gerdau, Gustavo Werneck, who was temporarily serving in the position during the last three months. Wang has almost 30 years of experience at Gerdau and held several positions in Brazil, Canada, China, and the United States.
  • Germany’s leading engine manufacturer, MTU Aero Engines AG, recently announced the formation of a separate department, Additive Manufacturing, to explore conceptual designs of applications and constructions from a bionics viewpoint, push the development of the production technology forward, and industrialize the entire process chain. Dr. Jürgen Kraus has assembled a team of around 30 professionals from various technical disciplines: design engineers, structural mechanics engineers, process specialists, and operations scheduling experts.
  • GE Additive recently released an update to its Concept Laser M2 cusing and M2 cusing Multilaser machines to provide aerospace, automotive, medical customers with an increased level of productivity and reliability. The upgrades include a new gas flow system and a higher build chamber with a z-axis of 350 mm and newly designed heating.

Equipment Chatter

  • A two-zone walk-in temperature humidity cycling room was recently shipped by Tenney Environmental announced the shipment of a two- zone walk-in temperature humidity cycling room to replicate negative pressure housing conditions to test door locks during the design phase. In addition, Tenney announced shipment of a vacuum temperature space simulation system for the manufacturer of laser guidance modules for satellites and other space equipment that is used to assure precise locations of equipment while they are docking together.
  • A manufacturer of recreational vehicles recently received shipment of a gas-fired aluminum stack melting and holding furnace from Lindberg/MPH to provide additional melting capacity and efficiency for a new die casting machine installation. Lindbergh/MPH also recently announced shipment of a box furnace with retort to a laboratory in Canada to be used to test parts in a hydrogen atmosphere. The temperature range is 212°F to approximately 2200°F and the customer will run it at a maximum temperature of 1922°F.
  • A natural gas-fired enhanced duty walk-in furnace was recently manufactured for a transportation technology company by Wisconsin Oven Company to be used for heat treating baskets of aluminum parts. The heat-treating equipment has a maximum temperature rating of 600°F (315°C) and has sufficient capacity to heat 1,312 pounds (5,952 kg) of aluminum from 70°F (21°C) to 482°F (250°C) within 120 minutes when loaded into an ambient oven. Wisconsin Oven Company also manufactured a custom electrically heated enhanced duty walk-in oven for an aerospace parts manufacturer to be used for curing composites. The maximum operating temperature of this composite curing oven is 500°F.
  • An order for advanced tubes has been received by Sandvik Materials Technology from a company related to the energy segment.

Kudos Chatter

  • The Buehler Wilson® Reference Block Laboratory in Binghamton, New York, has achieved accreditation to ISO/IEC 17025 by A2LA (American Association for Laboratory Accreditation) for Rockwell, Knoop, Vickers, and Brinell hardness test blocks and indenters. A2LA is in full conformance with the standards of the International Organization for Standardization (ISO) and the International Electro-Technical Commission (IEC), including ISO/IEC 17025. Buehler markets the reference blocks along with the Wilson hardness testers and DiaMet software globally.
  • The world’s largest independent Pratt & Whitney Canada authorized PT6A Designated Overhaul Facility (DOF) with distribution rights on certain engine models, StandardAero, is celebrating its second anniversary as a chosen supplier of PT6A engine maintenance to business aircraft manufacturers Textron Aviation.

 

Heat Treat Today is pleased to join in the announcements of growth and achievement throughout the industry by highlighting them here on our News Chatter page. Please send any information you feel may be of interest to manufacturers with in-house heat treat departments especially in the aerospace, automotive, medical, and energy sectors to the editor at editor@heattreattoday.com.

15 Quick Heat Treat News Items to Keep You Current Read More »

How Aging Heat Treatment of AF 1410 Steel Affects Impact Energy, Strength

/ FEATURED NEWS, MANUFACTURING HEAT TREAT, MANUFACTURING HEAT TREAT NEWS

 

Source: ASM International

 

ASM International recently posted an instructive article on the effect of aging temperature on impact energy and yield strength on AF 1410 steel, complete with a helpful graph displaying maximum and minimum results on both at various temperature ranges.

Read more: “Heat Treatment of High-Alloy Nickel-Cobalt Steels”

How Aging Heat Treatment of AF 1410 Steel Affects Impact Energy, Strength Read More »

Heat Treaters Score Reduced Footprint, Simplified Product Flow

/ FEATURED NEWS, HEAT TREAT NEWS INDUSTRIES

 

Source: ASM International

 

A heat treating system that provides the end user a reduced footprint and simplified product flow has been introduced by a manufacturer of low pressure carburizing vacuum furnaces. The one module system minimizes space with three stacked heat cells and gas-quenching cells and develops carburizing recipes at higher temperatures without affecting material properties.

Read more: “ECM’s ICBP Nano Heat Treating System Minimizes Footprint, Simplifying Product Flow”

Heat Treaters Score Reduced Footprint, Simplified Product Flow Read More »